Mechanical Services

Mechanical 1 Mechanical Services
Mechanical Srvc Txt Mechanical Services
Services >> Mechanical Services
DesignDev Mechanical Services
Design & Development
At TAAL Tech, our goal is to help our customers innovate faster, bring more products to fruition, and to do so cost-effectively. We specialize in Product Design & Development that seeks to blend design creativity with engineering excellence. Our internal focus is on hiring and nurturing the best design talent available. Our Product Engineering teams are very experienced and have an excellent understanding of customer expectations across a wide array of domains.

  • Faster innovation - efficient R&D and design support for products and processes
  • Cost-effectiveness - reduced cost with a quick turnaround time
  • Reduced Risk – flexibility and agility to adapt and respond to fluctuations in project demands and customer requirements

 

  • Concept Design
  • Reverse Engineering
  • Re-Engineering
  • Electrical Wire Harness Routing
  • Tolerance Stack-Up
  • CAD Data Migration
  • Engineering Change Management
  • Detail/Manufacturing Drawing Creation
  • Installation Drawing Creation
  • Concession and Repair Schemes
  • Layout and Schematics creation
  • As-Built Drawing creation
  • Should Costing
  • Benchmarking

Design Tools: CATIA V5, V6, CATIA 3D Experience, UG-NX, Solidworks, Solid Edge, PTC Creo, Inventor, AutoCAD, Alias, Icem Surf,

PLM Tools: ENOVIA, Windchill, Teamcenter

  • Services
  • Process Arrow Mechanical Services
  • Mechanical Services
Verification valid Mechanical Services
Verification & Validation
Verification & Validation is a complex process of verifying computer-generated models/ simulations against hard empirical data. Efficient predictive engineering processes require a clear understanding of client’s needs, accurate finite element modeling/analysis, and rapid data output. Done properly this helps the customer in making informed decisions early in the design process itself so that cycle times are reduced and the success rate is increased. At TAAL Tech, we have built a very strong predictive engineering practice employing best in class engineers so that we can help you tackle the most complex engineering challenges.

  • Optimize the product development process
  • Recognize crucial failure points in the development life-cycle
  • Identify gaps and remodel products

  • Linear / Non-Linear Analysis
  • Static/Dynamic Analysis
  • Impact/Crash Analysis
  • Fatigue & Damage Tolerance
  • Multi-Body Dynamics
  • Engineering Hand Calculations
  • Creep Analysis
  • Stress Reports
  • CFD - Analysis
  • Weights & Balances
  • Kinematic Analysis
  • Simulation
  • Co-Relation Analysis

Analysis Tools: Ansys, NASTRAN, PATRAN, Hypermesh, FEMap, Creo Simulation, Abacus, CFX, Fluent

PLM Tools: ENOVIA, Windchill, Teamcenter

  • Services
  • Process Arrow Mechanical Services
  • Mechanical Services
Production Support Mechanical Services
Production Support
At TAAL Tech we have a very clear understanding of the interface between design engineering and manufacturing. We recognize the need for developing optimal methods and tooling in order to support cost-effective and innovative products. We provide a range of services that can help to drive cohesion between product design and the manufacturing.

  • Rapid prototyping and manufacturing – with standardized processes
  • Automation - reduce production time and errors due to manual intervention
  • High production yield – with a quick turnaround time on design and fixtures that aid manufacturing
  • Optimization – remove bottlenecks, reduce defects, and improve speed and quality of products

  • Process Planning
  • Work Instructions
  • Standard Operating Procedure
  • Layout Creation
  • NC Programming
  • Prototype Support
  • Vendor Development
  • Supplier Quality Assessment and Support
  • Low Cost Sourcing

Design Tools: CATIA V5, V6, CATIA 3D Experience, UG-NX, Solidworks, Solid Edge, PTC Creo, Inventor, AutoCAD Programming Tools: UG NX CAM, CATIA V5 NC, PTC Creo NC, Vericut, Simulation Tools: DELMIA – Plant Layout, DELMIA – Robo Simulation, 3D Via, 3ds Max

PLM Tools: ENOVIA, Windchill, Teamcenter

  • Services
  • Process Arrow Mechanical Services
  • Mechanical Services
Product Sustenance Mechanical Services
Product Sustenance Support

TAAL Tech has built significant expertise in the field of Value Analysis and Value Engineering (VAVE). Our goal is to help our customers remain nimble and competitive in a rapidly changing marketplace. Our team has accumulated vast of experience and knowledge in this field so that we can, very quickly, respond to customer needs, and provide tangible benefits in terms of cost, quality, and product effectiveness.

  • Enhancing the speed of delivering effective designs into the market
  • Enhancing quality, operational performance and compliance while reducing cost of production
  • De-cluttering and refinement of processes across the entire product/service lifecycle

Selection & Information

  • ABC/Pareto Analysis
  • Index of Potential
  • Probabilistic Approach
  • Should Costing

Function, Creativity & Evaluation

  • FAST/FWCA
  • Brainstorming
  • Cause & Effect Diagram
  • Feasibility Ranking Matrix, Pugh Matrix, Evaluation Matrix

Design & Recommendations

  • Prediction Model
  • Should Costing
  • Re-engineering
  • Stress Analysis
  • FMEA
  • Risk Assessment

Prove-Out

  • Prototype Build
  • Validation

Design Tools: CATIA V5, V6, CATIA 3D Experience, UG-NX, Solidworks, Solid Edge, PTC Creo, Inventor, AutoCAD

Analysis Tools: Ansys, NASTRAN, PATRAN, Hypermesh, FEMap, Creo Simulation, Abacus

Data Analysis Tool: Minitab, Crystal Ball

PLM Tools: ENOVIA, Windchill, Teamcenter

At TAAL Tech we have built a strong practice around Sustenance Engineering. Our aim is to help our customers to remain competitive by extending the market life of existing products while minimizing associated costs and shrinking engineering timelines. By doing so we try to relieve our customers of the efforts required to support existing product lines so that they can, instead, focus on new product development.

  • Increase in reliability of products and services
  • Continuous product support in the form of upgrading products and re-engineering
  • Effective product failure and root cause analysis

  • Engineering Change Management
  • Concessions & Repair Schemes
  • Product Upgrades
  • Product Re-Engineering
  • Engineered to Order

Design Tools: CATIA V5, V6, CATIA 3D Experience, UG-NX, Solidworks, Solid Edge, PTC Creo, Inventor, AutoCAD

Analysis Tools: Ansys, NASTRAN, PATRAN, Hypermesh, FEMAP, Creo Simulation, Abacus

PLM Tools: ENOVIA, Windchill, Teamcenter

At TAAL Tech we appreciate the need for a fully completely integrated solution offering. Which is why we complement our engineering, design, validation and development competencies with robust Technical Documentation and Publication capabilities. Concise and accurate Technical documentation helps the user/ technician gain insight into specific procedures or operations rapidly and easily. TAAL Tech has extensive expertise in creating User Guides, Custom Manuals, Standard Practices Manuals, Documentation and Catalogs - each with detailed technical illustrations to explain complex systems and solutions. TAAL Tech has extensive experience in creating documents to industry standards, codes, and regulations.
All our publications adhere stylistically as well as functionally to international standards. We ensure that information is presented in a user friendly and “easy to understand” manner.

  • Accelerate user adoption
  • Reduce support costs
  • Receive end-to-end document solutions and support

Capabilities

Authoring:

  • System Descriptions
  • Maintenance Procedures
  • Inspection Schedules
  • Repair Procedures
  • Spare Parts List (IPC/IPL)
  • Technical Specifications
  • Test Procedures
  • Work Instructions
  • Product Support Documentation
  • Assembly Processes

Illustrating:

  • 2D Isometric Views
  • Exploded Illustrations
  • Isometric Cross-sectional views
  • Wiring Diagrams
  • Mechanical Flow illustrations
  • Illustrations rendering
  • Illustrations conversions
Tools

Authoring:

  • SGML/XML (Arbortext Epic Editor)
  • Adobe Frame Maker (Structured/Unstructured)
  • SAP Visualization
  • MS Word
  • Adobe Professional

Illustrating:

  • IsoDraw ver 6.1 & 7
  • Auto-Trol Tech Illustrator
  • Adobe Illustrator
  • Adobe 3D PDF
  • Adobe Photoshop
  • CAD Tools
  • 3D Via & Deep Exploration (Now SAP Visualization)

Authoring Tools : SGML/XML (Arbortext Epic Editor), Adobe Frame Maker (Structured/Unstructured), SAP Visualization, MS Word, Adobe Professional

Illustrating Tools: IsoDraw ver 6.1 & 7, Auto-Trol Tech Illustrator, Adobe Illustrator, Adobe 3D PDF, Adobe Photoshop, 3D Via, CATIA V5, V6, UG-NX, PTC Creo, Solid Works, Solid Edge, Inventor, AutoCAD