Role |
Principal Process Engineer– Oil &Gas |
No of Positions |
01 |
Experience |
15 – 20 Years (EPC Exp Must) |
Educational Qualification |
B.E/B.Tech. (Chemical), ME/M.Tech |
Location |
Bangalore |
Skill / Tools Knowledge Required |
- Aspen Plus
- HYSYS
- Pipesim
- Flarenet
|
Roles & Responsibilities
- Minimum 15-20 years relevant experience with hands on in engineering, designing, detailing, and checking in an engineering consultancy or EPC company and with exposure on international projects within the oil and gas industry.
- 6-10 years of experience in leading Process engineering teams in demanding industrial investment projects, supervising and guiding a team of Process engineers and reporting to project manager.
- Experience in international long-term assignments.
- Applicants must be flexible to work in Europe on a long-term basis.
- Should demonstrate engineering leadership and ownership of the designated projects.
- Must possess a strong working knowledge of downstream oil & gas and/or petrochemical units and operating principles. Must possess a thorough knowledge of industry practices, tools, codes and standards applicable to the discipline.
- Tool knowledge must be hands-on (Aspen tools experience preferred).
- Must demonstrate extensive knowledge in FEED, Design and Detail engineering activities.
Role Principal Process Engineer– Oil &Gas No of Positions 01 Experience 15 – 20 Years (EPC Exp Must) Educational Qualification B.E/B.Tech. (Chemical), ME/M.Tech Location Bangalore Skill / Tool...
Role |
Electrical Harness Routing |
No of Positions |
03 |
Experience |
05-10 years |
Educational Qualification |
Diploma or B.E/B.Tech |
Location |
Bangalore |
Skill / Tools Knowledge Required |
Catia V5/V6 is mandatory |
Job Type |
Contract 1 to 1.5 yrs. (extendable) |
Roles & Responsibilities
- Ability to Work on Aircraft Interior design integration of electrical systems and components.
- Proficient in Catia V5 Harness Routing.
- Proficient in system level Wire Diagram/Schematic Diagram.
- Proficient in Electrical Harness Design for Interiors Monuments like Galleys, Bulkheads and Closets.
- Proficient in Creating Electrical Harness Drawings and Generating Electrical BOM.
- Experience in complete Interior cabin layouts and configurations.
- Understanding of EWIS requirements for electrical harness installation.
- Ability to complete system level Electrical Load Analysis.
- Proficient in Catia V5.
- Experience in handling PLM/PDM Tools.
Role Electrical Harness Routing No of Positions 03 Experience 05-10 years Educational Qualification Diploma or B.E/B.Tech Location Bangalore Skill / Tools Knowledge Required Catia V5/V6 is mandatory J...
Role |
Mechanical System Routing |
No of Positions |
03 |
Experience |
05-10 years |
Educational Qualification |
Diploma or B.E/B.Tech |
Location |
Bangalore |
Skill / Tools Knowledge Required |
Catia V5/V6 is mandatory |
Job Type |
Contract 1 to 1.5 yrs. (extendable) |
Roles & Responsibilities
- Ability to work on Aircraft Interior Design Integration of Mechanical Systems (Air Conditioning/Ventilation, Wastewater Management, Smoke Detection & Oxygen Systems).
- Proficient in Catia V5 Mechanical Piping.
- Design and develop aircraft interior mechanical systems (seating, bins, galleys, etc.).
- Proficient in Aircraft Structures.
- Familiarity with compliance with aerospace standards and regulations.
- Proficient in complete Interior cabin layouts and configurations.
- Familiarity with ATA 21, 26, 35 & 38 Chapters.
- Proficient in Flow & Pressure Calculations.
- Familiarity with Mechanical System Validation.
- Experience in handling PLM/PDM Tools.
Role Mechanical System Routing No of Positions 03 Experience 05-10 years Educational Qualification Diploma or B.E/B.Tech Location Bangalore Skill / Tools Knowledge Required Catia V5/V6 is mandatory Jo...
Role |
Interiors Design |
No of Positions |
03 |
Experience |
05-10 years |
Educational Qualification |
Diploma or B.E/B.Tech |
Location |
Bangalore |
Skill / Tools Knowledge Required |
Catia V5/V6 is mandatory |
Job Type |
Contract 1 to 1.5 yrs. (extendable) |
Roles & Responsibilities
- Proficient in Interiors Monuments Design and Details for (Galleys, Closets, Bulkheads, Side ledges, and Ceilings).
- Proficient in Catia V5 Surface modelling, Sheet Metal & Assembly.
- Proficient in Preparing Envelops, Installation Drawings.
- Good knowledge of Aircraft Primary Structures and Secondary Structures and monuments Attachments.
- Experience in Change Management Process.
- Proficient in complete Interior cabin layouts and configurations.
- Ability to understand LOPA, Elevations and Zonal wise Layouts.
- Good Understanding of Composite Panels, Bonding Methods, and Manufacturing.
- Good understanding on Decorative Aerospace Materials.
- Good understanding of ASME Y14.5.
- Experience in handling PLM/PDM Tools.
Role Interiors Design No of Positions 03 Experience 05-10 years Educational Qualification Diploma or B.E/B.Tech Location Bangalore Skill / Tools Knowledge Required Catia V5/V6 is mandatory Job Type Co...
Role |
Lead Electrical Engineer |
No of Positions |
01 |
Experience |
10+ years |
Educational Qualification |
ME/M.Tech/MS-Electrical |
Location |
Bangalore |
Skill / Tools Knowledge Required |
ETAP, AutoCAD |
Roles & Responsibilities
- Minimum of 10 years of experience in high and medium-voltage (Power Transmission) power projects.
- In-depth knowledge of UK Standards for electrical engineering.
- Experience with DNO projects is highly desirable.
- Lead the design, development, and implementation of high and medium voltage power projects.
- Prepare and review detailed electrical engineering designs, specifications, and documentation in accordance with UK Standards.
- Stay updated with the latest industry trends, technologies, and best practices in high and medium-voltage engineering.
Role Lead Electrical Engineer No of Positions 01 Experience 10+ years Educational Qualification ME/M.Tech/MS-Electrical Location Bangalore Skill / Tools Knowledge Required ETAP, AutoCAD Roles & Re...
Role |
Lead Engineer-Piping Layout |
No of Positions |
02 |
Experience |
10-15 years |
Educational Qualification |
B.E / M.E- Mechanical |
Location |
Bangalore |
Skill / Tools Knowledge Required |
Plant 3D / PDMS / SP3D |
Roles & Responsibilities
- Minimum of 10 years of experience in piping design within EPC projects.
- Proficiency in 3D modeling software such as AutoCAD Plant 3D, PDMS, or Smart Plant 3D.
- Strong understanding of piping codes and standards (ASME, API, etc.).
- Lead and coordinate piping layout design activities for EPC projects.
- Develop piping and equipment layouts in accordance with project specifications and industry standards.
- Review and approve piping isometrics, orthographic drawings, and bill of materials.
- Provide technical guidance and mentorship to junior designers and engineers.
Role Lead Engineer-Piping Layout No of Positions 02 Experience 10-15 years Educational Qualification B.E / M.E- Mechanical Location Bangalore Skill / Tools Knowledge Required Plant 3D / PDMS / SP3D Ro...
Role |
Lead Engineer- Civil & Structural |
No of Positions |
02 |
Experience |
10-15 years |
Educational Qualification |
B.E / M.E- Civil/Structural |
Location |
Bangalore |
Skill / Tools Knowledge Required |
Staad Pro / ETABS / SAP |
Roles & Responsibilities
- Proficiency in civil and structural engineering software (STAAD.Pro, SAP2000, ETABS).
- Minimum of 10 years of experience in civil & structural design within EPC projects.
- Strong understanding of civil and structural engineering codes and standards (ACI, AISC, etc.).
- Experience in the design of industrial structures, including those in chemical and oil and gas plants.
- Professional Engineer (PE) or Chartered Engineer (CEng) certification is preferred.
- Lead the design and analysis of foundations, steel structures, and concrete structures.
- Prepare and review civil engineering drawings and specifications.
- Support project planning, scheduling, and cost estimation activities.
Role Lead Engineer- Civil & Structural No of Positions 02 Experience 10-15 years Educational Qualification B.E / M.E- Civil/Structural Location Bangalore Skill / Tools Knowledge Required Staad Pro...
Role |
Lead Engineer- E & I |
No of Positions |
02 |
Experience |
10-15 years |
Educational Qualification |
B.E/M.E- Electrical / Instrumentation |
Location |
Bangalore |
Skill / Tools Knowledge Required |
ETAP / SPI |
Roles & Responsibilities
- Minimum of 10 years of experience in electrical & instrumentation design within EPC projects.
- Strong understanding of electrical and instrumentation codes and standards (IEEE, NEC, IEC, etc.).
- Lead the design and analysis of electrical and instrumentation systems.
- Prepare and review E&I drawings, specifications, and datasheets.
- Conduct site investigations and assessments.
- Oversee installation and commissioning activities to ensure compliance with design documents.
- Provide technical guidance and mentorship to junior engineers.
Role Lead Engineer- E & I No of Positions 02 Experience 10-15 years Educational Qualification B.E/M.E- Electrical / Instrumentation Location Bangalore Skill / Tools Knowledge Required ETAP / SPI R...
Role |
Lead Engineer- Piping Stress |
No of Positions |
02 |
Experience |
10-15 years |
Educational Qualification |
B.E / M.E- Mechanical |
Location |
Bangalore |
Skill / Tools Knowledge Required |
CAESAR II / AutoPIPE |
Roles & Responsibilities
- Minimum of 10 years of experience in piping stress within EPC projects.
- Proficiency in stress analysis software (CAESAR II, AutoPIPE).
- Strong understanding of piping codes and standards (ASME, API, etc.).
- Develop stress isometric drawings and stress reports.
- Review and approve piping layouts to ensure flexibility and support adequacy.
- Conduct stress analysis for critical piping systems, including high-temperature and high-pressure lines.
- Provide technical guidance and mentorship to junior engineers.
Role Lead Engineer- Piping Stress No of Positions 02 Experience 10-15 years Educational Qualification B.E / M.E- Mechanical Location Bangalore Skill / Tools Knowledge Required CAESAR II / AutoPIPE Rol...
Role |
Instrumentation & Control Engineer |
No of Positions |
02 |
Experience |
10-15 Years |
Educational Qualification |
B.E- Instrumentation / Electrical |
Location |
Bangalore |
Roles & Responsibilities
- Develop project scopes in the detailed design phase; provide input to project plans and deliverable lists.
- Develop project P&IDs of moderate complexity.
- Develop procurement specifications, documentation, and data sheets of basic to moderate complexity.
- Develop basic Total Installed Cost (TIC) estimate Material Take-Offs (MTO).
- Perform Factory & Site Acceptance tests (FAT/SAT) on vendor equipment, with potential travel requirements.
- Adhere to the company’s Project Services Quality System (PSQS).
- Specify HMI, PLC, and DCS hardware and wiring.
- Create I/O lists for project scope & review loop drawings.
Role Instrumentation & Control Engineer No of Positions 02 Experience 10-15 Years Educational Qualification B.E- Instrumentation / Electrical Location Bangalore Roles & Responsibilities Deve...
Role |
Interior Design Engineer |
No of Positions |
01 |
Experience |
05-10 years of relevant job experience in aircraft interior engineering is a must. |
Educational Qualification |
Bachelor's degree in mechanical engineering or a related field |
Location |
Bangalore |
Skill / Tools Knowledge Required |
SOLID WORK |
Roles & Responsibilities
- Business class aircraft interior design experience using Solid works.
- Have the familiarity with aircraft materials, process specifications related to interior design.
- Have the familiarity with detail design of Sheetmetal/machined/composite components.
- Have the familiarity with cabinet design, installations related system design, interface control with major structural work packages.
- Have the ability to understand aircraft interior configuration in business aircraft segment through existing engineering drawings.
- Have the ability to understand and implement Tolerancing, GD&T and ASME requirements on drawings.
- Addressing the manufacturing issues and subsequently revising the parts design and Installation drawings through Engineering Change Request (ECR).
- Preparation of delivery schedules based on priorities.
- Directing the team in understanding the design methodologies, materials, and process specifications.
- Monitoring and controlling the project and sharing with the Project Manager and Client by weekly basis
- Interaction with customer, conducting meetings and telecom to progress the task as per Customer’s satisfaction, Preparation of delivery schedules based on priorities.
- Excellent communication skills, both verbal & written
- Having good interpersonal skill with flexibility in working hours. Work on problems of diverse scope, apply knowledge to intermediate to complex problems, identify with non-standard tasks/queries
- Perform as a technical authority in your field(s) of expertise.
- Have the ability to take responsibility for drawing quality of monument and approve new and revised drawings to manufacturing.
- Have the ability to coordinate with designers and ensure intended design changes are captured in the drawings meeting applicable aerospace standards.
- Have a clear understanding of the different phases of aircraft development and interior design cycle.
Role Interior Design Engineer No of Positions 01 Experience 05-10 years of relevant job experience in aircraft interior engineering is a must. Educational Qualification Bachelor’s degree in mech...
Role |
Structural Engineering |
No of Positions |
01 |
Experience |
04-06 Years |
Educational Qualification |
B.E or B.Tech in Civil /ME or M.Tech in Structural Engineering |
Location |
Bangalore |
Skill / Tools Knowledge Required |
STAAD Pro, RAM Connections, Spread Sheet creation and connection design software’s |
Must Require Skills |
STAAD Pro, International codes exposure |
Roles & Responsibilities
- Structural Analysis and Design for both STEEL and Concrete structures
- Familiar with international standards like ASCE, AISC, European codes etc.
- Good Knowledge on STAAD pro and RAM connection software’s
- Should be able to do structural connection designs independently.
- Strong Communication skills.
- American projects experience.
Job Features
Job Category | Civil & Infra |
Role Structural Engineering No of Positions 01 Experience 04-06 Years Educational Qualification B.E or B.Tech in Civil /ME or M.Tech in Structural Engineering Location Bangalore Skill / Tools Knowledg...
Role |
Electrical Designer / Engineer – Oil & Gas |
No of Positions |
02 [Available to join maximum of 2-3 weeks] |
Experience |
05-10 Years |
Educational Qualification |
Dip / B.E. (Electrical) |
Location |
Bangalore |
Must Require Skills |
AUTOCAD, MicroStation, PDS, Smart Plant 3D |
Roles & Responsibilities
- Electrical design using 2D and 3D tools and able to do the following (Oil and Gas experience is must).
- Single line diagrams, cable schedules.
- Cable Tray modeling and routings layouts.
- Cable trenches modeling and routings layouts.
- Cable routings layouts.
- Lighting modeling and lighting layouts.
- Lighting circuit design.
- Grounding layouts.
- Substation Design (equipment, earthing, cable tray and cable routing).
- Hazardous areas classification drawings.
- Bulk material take off.
- Heat Tracing experience.
Role Electrical Designer / Engineer – Oil & Gas No of Positions 02 [Available to join maximum of 2-3 weeks] Experience 05-10 Years Educational Qualification Dip / B.E. (Electrical) Location Bang...
Role |
Piping Layout Engineer – Oil & Gas (Oil & Gas, Petrochemical, Power, Refineries) |
No of Positions |
01 |
Experience |
06-08 Years |
Educational Qualification |
BE/B.Tech (Mechanical) |
Location |
Bangalore |
Must Require Skills |
PDS, SP3D, Aveva ERM, AutoCAD, MicroStation, Navis Work |
Roles & Responsibilities
- Skills Required - PDS, SP3D, Aveva ERM, AutoCAD, MicroStation, Navis work, SPR, MS Office.
- Knowledge of Piping layout, codes and Standards.
- Knowledge about all major equipment Piping.
- Isometric Checking.
- Knowledge on FEED and detail Engineering.
- Preparation of Plot plan, Equipment layout drawing.
- Interdisciplinary Interaction.
- Should have knowledge on Battery Limit layout.
- Should have knowledge on UG layout.
- Should be able to understand As-built drawings.
Role Piping Layout Engineer – Oil & Gas (Oil & Gas, Petrochemical, Power, Refineries) No of Positions 01 Experience 06-08 Years Educational Qualification BE/B.Tech (Mechanical) Location Ba...
Role |
Lead Process Engineer |
No of Positions |
01 |
Experience |
12-16 Years |
Educational Qualification |
BE/B.Tech (Chemical), ME/M.Tech |
Location |
Bangalore |
Must Require Skills |
- Professional experience in process design in the oil and gas industry.
- Good communication skills
|
Technical Competencies |
- Aspen Plus, HYSYS, Flarenet, Pipesim, Flare net
knowledge of SPPID is advantage.
- Minimum 5-year experience with Catia / Solid works.
|
Roles & Responsibilities
Lead and manage multiple process engineering projects simultaneously, ensuring timely completion within budget and meeting client expectations.
Provide technical guidance and oversight to junior engineers, interns, and contractors, ensuring adherence to industry standards, best practices, and company policies.
Perform detailed process design, including preparation of basic flow diagrams, process flow diagrams, piping & instrumentation diagrams, utility summary and distribution diagrams, and equipment lists.
Develop a deep understanding of the process design basis, process descriptions, and emergency shutdown philosophies to ensure optimal plant performance and safety.
Perform thermal sizing of heat exchangers, air coolers, and other equipment to meet process requirements and optimize energy efficiency.
Calculate sizes of pumps, separators, heat exchangers, air coolers, reactors, agitators, cooling towers, filters, distillation columns, vessels/tanks, and prepare equipment process datasheets.
Perform pump hydraulic calculations, create reports, and prepare datasheets for all types of pumps used in the process.
Size control valves, orifices, and prepare process datasets for instruments such as control valves, on/off valves, flow meters, pressure gauges, temperature sensors, and level transmitters.
Analyze relief devices, perform sizing calculations, and prepare reports and datasheets according to API standards.
Conduct line hydraulic analyses, calculate line sizes and pressure drops, and prepare reports and datasheets.
Prepare design calculations using Microsoft Excel and other software tools to support process engineering deliverables.
Ensure all designs, drawings, and specifications comply with relevant safety, quality, and environmental regulations, and maintain up-to-date knowledge of industry codes, standards, and best practices.
Guide and train junior engineers and interns in process engineering principles, techniques, and tools to enhance their skills and expertise.
- Communication and Collaboration:
Effectively communicate project status, progress, and issues to clients, stakeholders, and cross-functional teams, fostering collaboration and coordination throughout the project lifecycle.
Role Lead Process Engineer No of Positions 01 Experience 12-16 Years Educational Qualification BE/B.Tech (Chemical), ME/M.Tech Location Bangalore Must Require Skills Professional experience in process...